My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

+54 11 45561000
dry-tech® bearing technology

+54 11 45561000

Gears & Gear racks Online-Shop

The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.

Categoría
Filtro
Tamaño

Debido al gran volumen de pedidos, el plazo de entrega es temporalmente de 10 a 15 días laborables más de lo indicado. Para pedidos urgentes, póngase en contacto con nosotros para que podamos concretar el plazo de entrega necesario para usted. Encontrará su persona de contacto en esta página.

Número de productos: 19

Nuevo

iguform S270 gears, mm

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

8 different modules available. Choose from over 300 dimensions.

Calculate service life now

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 1,96 USD/Uni.
318 artículos en stock, de los cuales:
314 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto
Nuevo

iguform S270 gear racks, mm

  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise

Matching modules available for the gear product range.

You will find information on the length in the product description.
desde / de 5,20 USD/Uni.
8 artículos en stock, de los cuales:
8 listo para enviar en 4 semanas desde Alemania
Ir a la página de producto
Nuevo

igutek P360 gears, mm

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

8 different modules available. Choose from over 300 dimensions.

Calculate service life now

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 2,26 USD/Uni.
317 artículos en stock, de los cuales:
315 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto
Nuevo

igutek P360 gear racks, mm

  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

Matching modules available for the gear product range.

You will find information on the length in the product description.
desde / de 6,72 USD/Uni.
8 artículos en stock, de los cuales:
8 listo para enviar en 4 semanas desde Alemania
Ir a la página de producto

xirodur® B180, gear, mm

  • ​​​​​​Very low coefficients of friction
  • Wear-resistant material for continuous operation
  • Vibration-dampening
  • Available in 3 hub designs

Matching gear racks available here
desde / de 9,75 USD/Uni.
9 artículos en stock, de los cuales:
6 listo para enviar en 24 - 48 horas desde Alemania
Ir a la página de producto

iguform S270 bevel gears - ratio 1:1

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 2,26 USD/Uni.
8 artículos en stock, de los cuales:
8 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

iglidur® F, gear, mm

  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs

iglidur® A500 gear, mm

  • The endurance runner at higher temperatures in the food sector
  • Compliant with Regulation (EU) No. 10/2011
  • FDA compliant
  • Temperature resistant from -100°C to +250°C

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 2,47 USD/Uni.
8 artículos en stock, de los cuales:
8 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

iguform S270 bevel gears - ratio 1:1,5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 7,54 USD/Uni.
2 artículos en stock, de los cuales:
2 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

iguform S270 bevel gears - ratio 1:2

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 5,31 USD/Uni.
10 artículos en stock, de los cuales:
10 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

iguform S270 bevel gears - ratio 1:3

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.


The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 4,19 USD/Uni.
8 artículos en stock, de los cuales:
8 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

iguform S270 bevel gears - ratio 1:4

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 3,48 USD/Uni.
6 artículos en stock, de los cuales:
6 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

iguform S270 bevel gears - ratio 1:5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 3,48 USD/Uni.
2 artículos en stock, de los cuales:
2 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto

igutek P360 bevel gears - ratio 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 6,32 USD/Uni.
10 artículos en stock, de los cuales:
10 listo para enviar en 48 - 72 horas desde Alemania
Ir a la página de producto
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.