Recubrimiento de protección contra el desgaste para sus componentes

Do you want to improve the sliding properties of your components? Or do you have components that need to be protected against wear? This is possible with our coating. Our coating powders consist of high-performance polymers and are tribologically optimised. This means that they reduce the coefficient of friction and ensure low wear.

What you will find on this page

The advantages of iglidur powder coating at a glance

Longer service life

Our plastic coating extends the service life of your components. The coating acts as a wear layer so that the underlying surface remains undamaged. At the same time, it improves the coefficient of friction of your component.

Simple

iglidur® coating reduces the complexity of your application, as no additional components are required. Coating can also be used where little installation space restricts your room for manoeuvre.

Versatile in use

You can use iglidur® powder coating in various applications. These include, for example, use at high temperatures up to 300°C, contact with food and chemicals.

How iglidur powder coating works

iglidur coating can be applied to electrically conductive surfaces. This is done with the help of an electrostatic powder coating process. The coating powder is evenly distributed on the surface to be coated and forms a homogeneous layer.

The coating thickness can be customised. However, it should be noted that the conductivity of the component surface and therefore the adhesion of the powder decreases as the layer thickness increases. The layer thickness is usually between 60 and 120μm**.**up to 500μm

The coatings are based on thermoplastic polymers, which are mixed with various fillers and solid lubricants and processed into a powder. Coated components no longer need to be lubricated and have an improved coefficient of friction.

Solicite el recubrimiento de su pieza

El componente está recubierto de material iglidur

Simply upload CAD, receive an immediate price quote and enquire or order.

Acceder a la herramienta online

Solicite el recubrimiento y aplíquelo usted mismo

Order iglidur® powder for plastic coating directly in our online shop and coat your components yourself. You can choose from various coating materials and container sizes.

Comprar recubrimiento en polvo

Here iglidur coating is in use

Less wear and shorter throughput times for packaging machines

A manufacturer of packaging and processing machines has reduced frictional resistance, improved rigidity, shortened throughput times and increased hygiene standards on a series of machines by applying an iglidur IC-05 tribo-coating to a sliding carriage.

As the thin lubricating coating, which measures 60 to 100μm, is FDA-approved, contact with food is also no problem in this application. The previous rollers made of an uncoated metallic material carried the potential risk of contaminating the packaging materials even despite regular cleaning of the machine.

Más información sobre la aplicación

Coated springs for blinds with iglidur coating

For this application, springs were coated with an iglidur coating material and used to guide window blinds. The manufacturer was faced with the problem that lubricants did not last as long as the blinds. He therefore tested the springs with an iglidur IC-02 coating.

Although the springs touched the aluminium housing during the test, the coated spring outlived the housing. In addition, the springs generated no noise during the test. Thanks to the coating, the use of grease can now be completely dispensed with.

Plates for pole mounting with iglidur IC-02 coating

Until now, wear pads made of aluminium and a POM material were used in this application to prevent the wear of two metal components. Today, this customer relies on wear pads coated with iglidur IC-02 high-performance polymers.

To ensure that the coated plates withstand the extreme environmental conditions, they were tested in practice with sand, water and high and low temperatures. The results show that the ambient conditions are no problem and the metal components do not wear out.

Adjustable office chair armrest with iglidur IC-02 coating

A manufacturer of office chairs used to work with components made of a POM material for the armrests. As the friction of this material was too high, the company decided on an alternative from igus: moulded aluminium linear guides combined with sliding elements made of iglidur J massively reduced the friction. Previously, the aluminium channels had been coated with a clear PTFE paint, which was both expensive and involved a long handling time.

Now the components are coated with IC-02 and no subsequent painting is required. The same contractor coats the inside with IC-02 and then paints the outside for a better look.

Solicitar una muestra gratuita

Solicite una muestra

Whitepaper sobre el recubrimiento en polvo

Descargar documento técnico

Frequently asked questions about iglidur coating

Do you have questions about our iglidur coating powders? Then take a look at our FAQs. There we answer your questions about coating with iglidur materials.

FAQ sobre los recubrimientos iglidur

Flexibly customisable liner

We offer you an alternative to coating with our iglidur tribo-tape liner. Thanks to the special iglidur material composition, the liner reduces the coefficient of friction and has low wear. It is available by the metre or in your desired shape. Typical fields of application are mechanical engineering, conveyor technology or fixture construction.

Learn more about tribo-tape

Consultas

Estaré encantado de responder a sus preguntas personalmente

Borisenko Martin

Distribuidor

Escribir un correo electrónico

Consultas y envíos

En persona:

De lunes a viernes de 8:00 a 18:00h

Online:
24h