igutex® TX3 | Fiber composite plain bearings for high load applications


Typical applications

Sector agrario
Maquinaria de construcción
Maquinaria pesada / Proyectos especiales

Here you can find further applications:
Soluciones industriales

 

When do I need it? If very high static loads occur permanently For heavy duty swivel applications When temperature resistance and media resistance are required in addition to very high load capacity

When do I not need it? When loads below 100 MPa occur Cojinete liso iglidur® G, mm Cojinete liso iglidur® Q2, mm Cojinete liso iglidur® Q, mm For rotary motion in continuous operation Cojinete liso iglidur® W300, mm Cojinete liso iglidur® Z, mm Cojinete liso iglidur® G, mm For high temperature, medium load applications Cojinete liso iglidur® X, mm Cojinete liso iglidur® J350, mm

Utilize nuestros filtros para encontrar el producto adecuado

Tolerances and measuring system
The installation dimensions and tolerances of the igutex® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Métodos de testaje

Assembly
igutex® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - montaje, pegado, mecanizado